How to Factory Reset Sharp TV? Is your Sharp TV acting up or not functioning as it should? Whether you’re troubleshooting a software issue or preparing to sell your TV, a factory reset can be the ultimate solution. This guide will walk you through simple and effective methods to factory reset your Sharp TV, including models like the Sharp Aquos LCD TV. We’ll also answer common questions about resetting to ensure your TV is back to optimal performance.
Factory Reset Methods for Sharp TV
Factory Reset Sharp TV Using the Buttons
For some Sharp TVs, you can perform a reset without navigating the menus by using the hardware buttons. This method is particularly useful if your remote is not working or the TV’s software has frozen. Here’s how you can do it step by step:
- Locate the Power and Input Buttons
On your Sharp TV, find the “Power” and “Input” buttons. These are typically located on the side or bottom edge of your TV.
- Unplug Your TV
Disconnect your TV from the electrical outlet to ensure it is completely powered off. Wait about 30 seconds.
- Press and Hold Buttons
While the TV is unplugged, press and hold both the “Power” and “Input” buttons simultaneously.
- Plug the TV Back in
Continue holding the buttons and plug the TV back into the power outlet. Wait until the TV powers up and the reset process begins.
- Release the Buttons
Once the TV starts resetting, release the buttons. This process will restore the TV to its factory settings.
This simple button method works on many Sharp TVs but not all. If it doesn’t work for your model, try the other methods below.
Read: Sharp TV Reset Button
Factory Reset Sharp Aquos LCD TV from Settings
If your TV is functional and you can access the on-screen menu, resetting through the settings is the easiest method. Follow these steps to perform a factory reset on a Sharp Aquos LCD TV:
- Access the Menu
Using your remote control, press the “Menu” button.
- Navigate to Setup
Scroll through the options and select “Setup” on the menu screen.
- Reset Option
Under the “Setup” menu, look for a “Reset” or “Initialize” option. This location may vary slightly depending on the model of your TV.
- Confirm Factory Reset
A prompt will appear asking you to confirm your decision to reset. Select “Yes” or “OK” and input your TV’s PIN code if necessary. (Default PIN is often 1234 or 0000 unless changed.)
- Wait for the Process to Complete
The TV will reset to its original factory settings. Once complete, the TV may restart automatically.
This method ensures all software settings are restored to defaults and is ideal if your TV is running but isn’t performing as expected.
Factory Reset Sharp Aquos LCD TV with the Secret Menu
For advanced users or those dealing with more complex issues, accessing the “Secret Menu” can help perform a deeper factory reset. This feature is available on select Sharp TV models and provides additional options beyond a standard reset.
- Turn Off Your TV
Start with the TV turned off completely.
- Enter the Secret Menu Code
Using your remote, press a specific sequence of keys quickly to access the “Secret Menu.” For most Sharp TVs, this sequence is often Menu > 9 > 9 > 1 or Power > Mute > Volume Down > Channel Down. (The sequence may vary, so check your user manual if this doesn’t work.)
- Select Factory Reset
Use the on-screen instructions to locate the factory reset option in the secret menu. Select it using your remote control or keypad.
- Follow the Prompts
Complete the reset process as instructed on the screen. Your TV will be restored to its original firmware settings. This may also erase deeper configurations like software updates or unsaved custom settings.
- Restart the TV
After the reset, restart your TV and check that it is functioning as expected.
Accessing the Secret Menu is a more technical solution, so proceed cautiously to avoid unintended changes.
FAQ’s
Q: Will a Factory Reset Remove Software Updates?
A: Yes, conducting a factory reset typically reverts the TV to its original firmware, removing any updates that have been applied since purchase. After resetting, you may need to install these updates again.
Q: Do I Lose All Saved Settings After Resetting?
A: Yes, a factory reset completely erases custom settings, such as network configurations, pictures, and sound preferences. Be sure to note any crucial settings before proceeding.
Q: How Can I Fix My TV If a Factory Reset Doesn’t Solve the Issue?
A: If issues persist after a reset, consider contacting Sharp customer support or a professional TV technician for further assistance. It could be a hardware fault rather than a software issue.
Q: What Should I Do if I Forget My Pin Code?
A: If you’ve forgotten your PIN code, try the default codes (1234 or 0000). If these don’t work, check your user manual or contact Sharp support for help resetting the PIN.
Q: Can I Undo a Factory Reset?
A: Unfortunately, a factory reset cannot be undone. This makes it essential to back up any saved settings or configurations before proceeding.
Q: Is a Factory Reset Safe to Perform?
A: Yes, factory resets are safe and recommended for resolving certain software issues or achieving a fresh start. Just ensure you follow the correct procedure for your Sharp TV model.
Conclusion
Whether you’re troubleshooting glitches or preparing to pass on your Sharp TV, performing a factory reset can bring it back to like-new condition. From using physical buttons to accessing hidden menus, the step-by-step instructions above should cover all your needs. Remember, resetting is a straightforward fix for many issues, but it always comes with the tradeoff of losing personalized settings. Take note of your preferences ahead of time and ensure your TV’s firmware is updated post-reset for the best experience.
